Checkout     Order Tracking

Shopping Cart

Items: 0
Subtotal: $0.00
Safe, Secure On Line Shopping 100% Secure Online Shopping

MuttFence Recommends

Perimeter Technologies® Comfort-Fit Deluxe In-Ground FencePerimeter Technologies® Comfort-Fit Deluxe In-Ground Fence

Feature packed, higher quality, lower cost, Made in USA Pet Fencing System.

Comparable to high-end, Chinese-made, PetSafe systems, but at a fraction of the price!

Progressive correction, temperature stabilization, wire condition adjustments all mean this fence is reliable, safe, and secure for you and your dog!

In-Ground Fence Transmitter

You can think of the transmitter as the heart and the brains of your in-ground dog fence system. “Heart” of the fence because it is the component that generates and transmits the fence signal down the fence wire. Ultimately, it is the signal generated by the transmitter that is picked up, through the air, by your dog's collar.

It is also the “brains” of the fence because it has software that allows you to adjust the fence frequency, the boundary size, the correction level of each collar, and has special programs to stabilize the fence boundary, and adjust to account for issues with the fence wiring.

The transmitter is highlighted in the following picture:

Picture showing the in-ground fence transmitter highlighted.

Transmitter Controls

Everything you need to do is controlled by two buttons on the transmitter, one marked “Scroll” and one “Set”. Despite featuring a wide range of adjustments, these two buttons are all that is needed, and the adjustments are detailed in a simple step-by-step process in the instruction manual. Just above the control buttons is the large, easy-to-read LED display.

Mounting and Connecting the Transmitter

The transmitter is wall-mounted and has slots on the back side. We include screws and wall plugs, so you have everything you need to mount the transmitter on the wall. The bottom of the transmitter has connections for power input and for the fence wire. In the following picture, you can see where the included A/C adapter plugs in.

Picture showing the in-ground fence transmitter power input.

To the right of the power input are the terminals for connecting the fence wire. On some of our competitors' systems, you'll connect these straight to the fence, but on our system, these will connect to the Lightning Protector. (More information about the Lightning Protector is included in another article. The link is at the bottom of the page.) This picture shows where the terminals are located.

Picture showing the in-ground fence transmitter power input.

Click to verify BBB accreditation and to see a BBB is a Secure Retail Site

[ Privacy PolicyBlogSite MapContact UsWebmaster ]

Copyright © 2014 Umbrella Pet Supply, Inc, All Rights Reserved.